How to install the chain saw guide bar? What are the installation steps?

22 April 2021

　　Chain saw guide bars have become frequently used in many places in life, and generally speaking, this product is also used in automobiles.

　　1. get ready

　　When installing the chain saw guide bar in time, you must make preparations. Generally speaking, the product is relatively sharp. In order to ensure absolute safety, you must wear protective gloves when operating. When installing, you must use a wrench to install, there are some flat screwdrivers or 13 mm wrenches.

　　2. install according to the process

　　When installing the chain saw guide bar, it must be installed according to the existing process, and the front baffle must be pushed to the forward handle, so that it can be confirmed whether the entire chain brake is locked. Loosen the compression nut, remove all the brake assembly and install the threaded chains, put all these chains upright, and then turn them horizontally. To install the guide bar according to the situation, the guide bar must be ensured to be on the top of the two pendulum screws, so that the chain saw guide bar can be installed in the proper position.

　　You must pay attention to the installation process of the chain saw guide bar, because there is an adjustment device on the brake assembly to adjust the tightness of the chain, so some different quick clips must be used during the installation process, so that it can be installed. Time to make positioning adjustment holes.

What should I pay attention to when using the saw guide bar

What should I pay attention to when using the saw guide board? How to make effective use? When the chainsaw guide bar is in use, most people may not know how to use it effectively. At present, there are many precautions in the use of the current chainsaw guide bar.

Which is better for the chainsaw guide bar

How to choose the saw guide bar? Which one is better?Because there is not only one chain saw guide bar, it is naturally necessary to choose the product, and when the user chooses the product, the first thing to look at is what kind of manufacturer it has. If the manufacturer is unreliable, it is naturally difficult to have good quality reliability. In fact, when talking about quality, the first thing to look at is what kind of technical strength the manufacturer is, and the product itself needs to be corresponding. If it does not meet the corresponding requirements, it will naturally be difficult for users to be satisfied.

What is the reason for the high temperature or heating of the saw guide bar

What is the reason for the high temperature or heating of the saw guide bar? How to solve? The saw guide bar will inevitably encounter some situations during use, because when this product is in use, due to a series of operations, the surface may become heated or overheated.