What is the length of the professional chainsaw chain

18 August 2021

　　What is the length of the professional chainsaw chain?

　　Take the B3 professional chainsaw chain used in 18 inches as an example. The professional chainsaw chain used is riveted into a circular ring. There are 30 left and right incisors, and there are 4 pitches between each two incisors (the upper pitch of the incisors is also counted), 0.404×4× 30 = 48.48 (inches) 1 foot = 12 inches, the data obtained is divided by 12 inches, 48.48 ÷ 12 = 4.04 feet, the length of this professional chainsaw chain is 4.04 feet. (Multiply 2 for calculation with center guide tooth)

　　Each box of professional chainsaw chain is 100 feet long. Various models of professional chainsaw chain have different pitches, so the number of cutting teeth is different. There are 4 pitches of guide teeth in the connecting piece attached to each cutting tooth. The calculation formula and data are as follows:

　　Type A: 100 (feet)÷(0.375×4÷12)=800

　　Type B: 100 (feet) ÷ (0.404 × 4 ÷ 12) = generally 744 (tooth cutting)

　　Type K: 100 (feet) ÷ (0.325×4÷12) = generally 924 (tooth cutting)

　　Type N: 100 (feet) ÷ (0.365 × 4 ÷ 12) = generally 822 (tooth cutting)

　　Normal professional chainsaw chain, in order to prevent cutting deviation, should be left and right pairs, that is, symmetrical, and the number of cutting teeth is even. The 100 feet issued by the manufacturer is not just an integer, and some are a little more because the cutting teeth of the professional chainsaw chain given are even numbers. However, some guide plates are not standard. The professional chainsaw chain cutting teeth riveted must be odd numbers, with two left (or right) cutting teeth on one side, plus a connecting piece and a middle guide tooth. Then its total length is calculated by the middle guide teeth, and there are two pitches for every two middle guide teeth (the pitch on the middle guide teeth is also counted). Then its length is the pitch multiplied by 2, multiplied by the number of guide teeth, and then divided by 12. Take K-chain, the number of guide teeth is 59 as an example:

　　0.325×2×59÷12=3.196 feet. The calculation method of other professional chainsaw chain is the same, the difference is their pitch.

　　In addition, there are two data to remember: 1 foot = 12 inches, 1 inch = 25.4 mm

　　Qirui parts is a leading China Carbide Chainsaw Chain Supplier, Guide Bar Manufacturer and Factory. Innovation is the driving force for us to establish competitive advantage, and is the key to our leading position in the fierce international market competition. We believe that innovation leads development, and we continue to create new products to meet the needs of more customers.

　　Our products can meet the needs of different customers. Welcome to choose Qirui parts - a leading China Carbide Chainsaw Chain Supplier, Guide Bar Manufacturer and Factory.

Related Products

Professional Saw Chain service Professional Saw Chain design

Chain saw chain breaker supplier

When supplying chainsaw chain breakers, what conditions need to be considered by the supplier? Many suppliers are particularly in need of the support of chainsaw chain breaker suppliers. So what kind of conditions should our buyers have to get the support of chain saw suppliers?

Buyers look for Chain saw Chain breaker supplier

The quality of the product is particularly importantThe quality factor is the survival of the supply chain. The use value of the product is based on the quality of the product. It determines the quality of the final consumer product and affects the market competitiveness and market share of the product.

What is the model of the professional saw chain

What is the model of the professional saw chain? 1. The composition of a professional saw chain: The professional saw chain is composed of left cutting teeth, right cutting teeth, middle guide teeth (also called driving teeth) connecting pieces, and rivets.