How to use a chainsaw chain

　　How to use a chainsaw chain? What should be done?

　　Chain saw chains are the most common equipment in our real life, so how can we better let the chain saw chain play its due effect? What kind of work should be done?

　　1. Check the chain lubrication

　　When connecting the chain for actual use, if the oil level in the mailbox does not decrease, it may be that the lubrication delivery has failed. In this case, it is recommended that you check the lubrication level of all chains. Generally speaking, a contaminated filter can also cause poor supply of lubricating oil. Related cleaning should be done, and the lubricating filter connected to the connection pump in the fuel tank should be replaced.

　　2. Re-adjust the running-in of the chain

　　When the chain saw chain is actually used, all chain running-in conditions must be readjusted. The running-in time of the chain is almost controlled at two to three minutes. After running-in, check the tension of the chain. If re-adjustment is necessary, then we must look at the actual situation. In a relatively cold state, it must be attached to the lower part of the guide plate, and all the chains can be moved upward by hand. If necessary, they must be tightened.

　　What should I pay attention to when using the chain saw chain? At present, when the product reaches a certain working temperature, it is basically necessary to look at the existing chain situation. Only use in a reasonable state will not relax.